Fully automatic shrink tunnel machine for cold brew coffee bottle
This fully automatic shrink tunnel machine for cold brew coffee bottle is a new shrink packaging machine for shrinkable sleeve Label, especially for glass bottles, metal shells, containers with liquids.
Heat tunnel shrink wrap machine uses heat sealing to directly heat various specifications of film. When shrinking and sealing, the product is transported to the shrinking furnace through a conveyor belt, and the product is loaded with shrink packaging film. After sealing, it enters the shrink packaging machine, and the product automatically shrinks. Heat shrink packaging machine consumption electricity is small, and the average hourly power consumption is not much. It achieves a qualified shrink packaging effect and will never affect the packaging. Electronic stepless speed change, solid-state voltage regulator temperature control, stable and reliable, used in food, beverage, candy, culture Shrink packaging of supplies, hardware tools, daily necessities, chemical supplies, etc.
Shrink film sleeve label for our shrink wrap machine is a new type of label printed on plastic film or plastic tube. It mainly includes PE, PVC, PET and other common heat shrinkable film types with the following characteristics:
1) The shrink film sleeve label is easy to process, the package is sealed, and it is anti-pollution, which is good for product protection.
2) The shrink film sleeve is close to the product, the packaging is compact, and the product shape can be displayed, so it is suitable for irregular products that are difficult to pack.
3) When labeling shrink film sleeves, no adhesive is required, and the same transparency as glass can be obtained.
4) The shrink film sleeve label can provide a 360 degree decoration for the packaging container, and can print product information and other product information on the label, so that consumers can understand the performance of the product without opening the package.
5) The printing of shrink film sleeve labels belongs to the printing in the film, which can protect the imprint, and the label has better wear resistance.
Because the shrink film sleeve is a kind of thermoplastic film that is stretched and oriented during the production process, but shrinks by heat during use. Therefore, before the design of the surface pattern, the horizontal and vertical shrinkage rate of the material, as well as the allowable deformation error in each direction of the decorative graphic and text after shrinking, must be taken into account to ensure the accurate restoration of the pattern, text, and bar code shrinking to the container.
Main Features of heat tunnel shrink wrap machine:
1. Self-contained steam generator which will generate the steam when wrapping.
2. Leakage protection switch: When the electric heating tube that has been in contact with the water source leaks for a long time, the main power supply can be cut off in time to prevent the outer casing from being lit.
3. Water shortage alarm and protection: When the water level of the water tank is lower than a certain height, the buzzer will alarm, and at the same time, the heating and power supply will be cut off to prevent the heating tube from dry burning. It also protects when you forget to open the water inlet or the hydration solenoid valve is faulty.
4. Automatic hydration: using electronic liquid level float ball, the control point is accurate and safe, and basically eliminates mechanical failure caused by high temperature of mechanical float ball.
5. The shrinking speed is fast and the effect is good, especially for the glass bottle, the metal shell and the container with liquid have better shrinking effect.
6. The steam output, direction and steam tube direction are completely free of tool adjustment, and the steam angle can be precisely adjusted according to the shape of the bottle to obtain the best shrinking effect while minimizing the possibility of thermal deformation of the bottle body.
Technical Data - Fully automatic shrink tunnel machine:
Model Number
|
F11
|
Chamber Size
|
L 120 x W 20 x H 30 cm
|
Steam Generator
|
0.6 mpa
|
Nozzle Pipe
|
10
|
Conveyor Speed
|
Conveyor Speed
|
Voltage
|
380V, 50HZ, 3 phase
|
Power Consumption
|
18 kw
|
Water Consumption
|
10 liter per hour
|
Overall Dimension
|
L 200 x W 60 x H 145 cm
|
Weight
|
200 kgs
|
Thank you!