Commercial shrink wrap machine for food
Product name: Commercial shrink wrap machine for food
Category: Automatic cellophane wrapping machine
Commercial shrink wrap machine for food box is type cellophane shrink wrapping machine, can fully automatic wrap up your food box into cellophane film and shrink up.
|
Specification for commercial shrink wrap machine for food: |
|
|
Type: |
Automatic wrapping machine series |
|
Product Model: |
K250 |
|
Name: |
Commercial shrink wrap machine for food |
|
Function: |
Wrap up the food box into with cellophane film, and shrink |
|
Application: |
food box |
|
Sealing type: |
Round corner cut and middle sealing |
|
Working height: |
780-850 mm |
|
Sealing height: |
115 mm |
|
Box packaging size: |
Length of Box /L: 100mm - 400mm |
|
Width of Box/W: 90mm - 350mm |
|
|
Height of Box/H: 30mm - 150mm |
|
|
Width + height < 420mm, length + height < 490mm |
|
|
Type of film: |
Center-folded polyolefin (POF) film |
|
Max film size: |
530mm (width) x 280mm (outer diameter) |
|
Packing capacity: |
600 - 720 box per hour |
|
Power supply: |
3 phase, 380V, 50-60Hz |
|
Power consumption: |
Max. 8.5 kW |
|
Air pressure: |
0.6MPa (6 bar) |
|
Oven size: |
1200(L) x 450 (W) x 220(H) mm |
|
Shrink tunnel conveyor speed: |
Max. 40 m/min |
|
Shrink tunnel conveyor: |
Rotating silicon coated rods |
|
Main control components: |
Omron temperature controller, timer, relay and sensor |
|
Machine main material: |
Powder coated carbon steel |
|
Machine weight: |
650KG |
|
Machine dimension: |
1800 x 780 x 1550mm + 1600 x 600 x 1360mm |
Machine maintenance of commercial food shrink wrap machine:
1. After working continuously for 2-3 months, the rear cover of wrapping machine should be opened to add lubricating oil to the sliding parts and switch bumpers.
2. The connecting parts of machine on the heating rod should be lubricated according to the use situation.
3. The heating strip and silicone strip should be kept clean and no foreign matter should be stuck to avoid affecting the sealing quality.
4. The commercial food shrink wrap machine is not allowed to be tilted or hit during transportation, and it cannot be laid down for transportation.
5. A reliable grounding device must be provided during installation. The user should provide the working air source and the inflation air source by himself.
6. The working pressure of the compressor has been set to 0.3MPa, which is more appropriate. Do not adjust it too much without special circumstances.
Thank you!
CopyRight 2025 Xiamen Sengong All Right Reserved
