Bag in box wrapping machine for folgers drip coffee box

Bag in box wrapping machine is type of cellophane wrapping machine for packing folgers drip coffee box with shrink wrap!

The bag in box wrapping machine is an important equipment on the production line of modern enterprises. The wrapping machine can improve the production efficiency of the enterprise. As a kind of packaging machine, the fully automatic heat bag in box wrapping machine has excellent performance and needs to be used with heat shrink film.

How to replace wrapping cellophane roll for bag in box wrapping machine?

1. Please turn off the power and make sure that the machine is in a power-off state for safer operation.
2. Place the wrapping cellophane roll on the roller above the fully automatic heat shrink packaging machine. Note that the opening part of the heat shrink film faces the inside of the fully automatic heat shrink packaging machine and is placed in the center.
3. Pull the control lever handle of the punching device down 90 degrees. Pull the heat shrink film down, pass the roller, pull out the heat shrink film about one centimeter, and then pass it through the triangular expander from the belt conveyor part to perform the film penetration work.
4. Pull the wrapping cellophane roll toward the front of the triangular expander. First pass the film material through the upper triangular expander, and then pass the film material through the lower triangular expander.
5. After the upper and lower heat shrink wrapping cellophane roll are passed out together, pull out a little, and then pull the opening part of the heat shrink film to the entrance of the waste pulling chain (belt).
6. After the film material has passed through the rollers and the upper and lower triangular plates smoothly, return the punching control lever to its original position.

Thank you!